dc.contributor.author | Gómez Zavaleta, Veronica Jhossellin | |
dc.contributor.author | Terrones Malca, Deysi Marimar | |
dc.contributor.author | Guerrero Escobedo, Adolfo Enrique | |
dc.contributor.author | Azabache Liza, Yrwin Francisco | |
dc.contributor.author | Rodriguez Espinoza, Ronald Fernando | |
dc.contributor.author | Ipanaqué Roña, Juan Manuel | |
dc.date.accessioned | 2025-07-02T20:57:05Z | |
dc.date.available | 2025-07-02T20:57:05Z | |
dc.date.issued | 2025-06-20 | |
dc.identifier.uri | https://hdl.handle.net/20.500.13067/3865 | |
dc.description.abstract | In the present study, the influence of temperature and activating agents in the production of activated carbon from peach pits was evaluated to determine the most effective removal of water hardness. To obtain experimental data, activation was carried out using a 1:1 ratio of KOH, H3PO4, ZnCl2, and H2SO4 at temperatures of 400°C, 500°C, and 600°C. The results indicate that the highest preparation yield was achieved with carbon activated by H3PO4 at 400°C, resulting in a 47% yield. In all activation cases, the surface acidity, determined by Boehm titration, exceeded the basic character. The predominant acidic character was obtained with ZnCl2 at 500°C, reaching 62.08 mol%; acid character analyses were supported by zero-charge point pH analysis. The best iodine index analysis results were 797.22 mg/g and 747.72 mg/g, obtained with ZnCl2 at 400°C and 600°C, respectively. The activated carbon with ZnCl2 at 400°C demonstrated an efficiency of 66.88 % in removing water hardness, representing the highest removal compared to other activated carbons. | es_PE |
dc.format | application/pdf | es_PE |
dc.language.iso | eng | es_PE |
dc.publisher | EREM ktu | es_PE |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | https://creativecommons.org/licenses/by/4.0/ | es_PE |
dc.subject | Activated carbon | es_PE |
dc.subject | Peach pit | es_PE |
dc.subject | Surface acidity | es_PE |
dc.subject | Iodine index | es_PE |
dc.subject | Water hardness | es_PE |
dc.title | Removal of Hardness from Water and Characterization of Activated Carbon Made from Peach Pit | es_PE |
dc.type | info:eu-repo/semantics/article | es_PE |
dc.identifier.journal | Environmental Research Engineering and Management | es_PE |
dc.identifier.doi | https://doi.org/10.5755/j01.erem.81.2.36612 | |
dc.subject.ocde | https://purl.org/pe-repo/ocde/ford#2.07.00 | es_PE |
dc.publisher.country | PE | es_PE |
dc.source.volume | 81 | es_PE |
dc.source.issue | 2 | es_PE |
dc.source.beginpage | 136 | es_PE |
dc.source.endpage | 155 | es_PE |